Underwater data communication system s synchronization signal processing 水聲數據傳輸系統中的同步信號處理
Two new speech detection methods based on neural networks using barker coded synchronization signal are presented 提出了兩種采用巴克碼編碼同步信號并基于神經網絡的起點檢測新方法。
In this issue the different schemes mentioned above will be analyzed and the results are described by synchronization signal distribution intuitively 通過分析,比較了兩種不同同步機制的不同性能,并用同步分布的方式對結果進行了直觀的表達。
It is conceived to introduce barker codes as synchronization preamble and add synchronization signal in front of speech signal to implement speech detection . the principle of this idea is presented 提出了引入barker碼作為同步碼,在語音信號前添加同步信號以實現起點檢測的工作設想,并介紹了其同步原理。
The system employs multicarrier modulation ( mcm ) technique as the modulation method , and linear frequency modulation ( lfm ) signal as the synchronization signal and digital signal processor ( dsp ) as the hardware ' s core chip 該系統選用多載波調制技術進行調制,選用線性調頻信號為其同步信號,選擇數字信號處理器為硬件核心芯片。
Synchronized drive module produces horizontal drive signal in synchronization with horizontal synchronization signal and field drive sawtooth in synchronization with vertical synchronization signal . these signal drive scaning sytem of slltv 同步驅動模塊產生與行、場同步的行同步驅動信號和場鋸齒波驅動信號,用于驅動激光電視的掃描系統。
The results of experiment tell it is an effective method of share current . a strategy of synchronization control , which combines competition coequality and priority , is mentioned in the paper and uses digital phase - lock loop to track synchronization signal 在同步控制上,應用了“優先與搶占”的方式產生同步信號,純硬件實現,簡單可靠;使用了成熟的數字鎖相環來跟蹤同步信號。
Therefore , it is necessary to mount timing system alone in synchronization network node and the place where there are more telecommunication equipments and the important hinge , which supplies the primary synchronization signal conformed to the standard 因此,有必要在同步節點處或通信設備較多的地方以及通信網的重要樞紐處,單獨設置時鐘系統,對所在的通信樓的設備提供合乎標準的同步基準信號。
Synchronization is the commander of every digital communication system , without it the system is unable to work orderly and correctly . a five - tuple of time - frequency diversity is adopted to guarantee that the synchronization signal be retrieved reliably in the receiver 同步是任何數字通信系統有序工作的“指揮棒” ,本研究采用5重時頻分集的方法,使得在接收端能夠可靠地恢復出系統工作所需要的同步信號。
Bits supplies the synchronous timing signal to these equipments inside the telecommunicationt building , such as dps , atm , no . 7 , dxc , tm & adm in sdh , don and in etc . the related techniques are involved in the content of synchronization ne twork , timing distribution , the timing signal transportations x impairments etc . the second chapter tells the structure and the function of the building integrated timing system . the third chapter summarizes the digital synchronization network techniques , which emphasizes the basic concept of synchronization networks analyzes the necessity of building the synchronization network and introduces all kinds of synchronization methods . the fourth chapter represents the transportation of the synchronization signal 本文第二章講述了通信樓綜合定時系統的構成及作用:第三章概述了數字同步網技術,著重描述了同步網的基本概念,分析了建立同步網的必要性,講述了各種同步方法;第四章闡述了同步定時信號的傳輸;第五章介紹了bits設備所支持的同步狀態消息;第六章、第七章為本文的重點,通過對時鐘信號建立數學模型,從理論上分析時鐘內部噪聲和相位瞬變產生時鐘定時信號損傷的原理,企圖尋找到更好地控制頻率漂移的方法。